| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Truss Rod sizes http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=42865 |
Page 1 of 1 |
| Author: | Dkeddy27 [ Sun Mar 02, 2014 8:51 am ] |
| Post subject: | Truss Rod sizes |
What length truss rod is used for a 25.5 scale length? I'm adjusting thru the sound hole. I bought a double action 14.5" rod from LMI. May your sails be full & your glass never be empty! |
|
| Author: | Hesh [ Sun Mar 02, 2014 12:37 pm ] |
| Post subject: | Re: Truss Rod sizes |
David you're good, I use 14.5" for 25.4 scale thru the sound hole adjust. I like the Allied rod designed by Mark Blanchard a little better than the LMI rod but size wise you're good-to-go. |
|
| Author: | Dkeddy27 [ Sun Mar 02, 2014 1:09 pm ] |
| Post subject: | Re: Truss Rod sizes |
Thanks Hesh ! So just keep the nut on my tenon and the other end should fall somewhere in between first fret & nut May your sails be full & your glass never be empty! |
|
| Author: | Hesh [ Sun Mar 02, 2014 1:27 pm ] |
| Post subject: | Re: Truss Rod sizes |
Yeah I line up my rod ends with the end of the fret board. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|